Gg. Clik - Dynamic 5Th Wheel (Optional) - Ki Mobility Little Wave Clik XP Manual De Instrucciones Y Garantía

V. SET UP & USE OF YOUR WHEELCHAIR
HH. Clik - Dynamic 5th Wheel (Optional)
Ki Mobility recommends anti-tip tubes or Rotating 5th wheel for all wheelchairs.
1. Inserting and removing the Dynamic 5th wheel
a. To remove, pull the release knob (Fig. 45:A) to disengage the locking pin and slide assembly
out of the tubular receiver (Fig. 45:B).
b. To insert assembly, pull release knob (Fig. 45:A) and insert assembly into tubular receiver
(Fig. 45:B).
c. Rotate the assembly in receiver to align slot (Fig. 45:C) and cross pin (Fig. 45:D).
d. Release knob (Fig. 45:A).
2. Adjusting the position from the floor
a. The caster stem is adjustable within the Dynamic 5th wheel arm.
b. Loosen 6mm bolt in clamping ring (Fig. 46:A).
c. Grasp caster fork assembly and move up or down to desired position (Fig. 46:B). Take care
to not rotate caster stern within housing while repositioning.
d. Retighten 6mm bolt in clamping ring (Fig. 46:A).
A
C
D
B
Fig. 45
Fig. 46
50
A
B