Startup Operation
5.4
Setting the limit signal transmitter
Fig. 19
1.
2.
3.
4.
5.
6.
7.
Important
For explosion-proof devices, remove the safety locking device when opening the cover and
reattach it after closing the housing.
22 - EN
Screw off housing cover.
Loosen screws (1) and remove cover plate (2).
Loosen screws (3 + 4).
Move the limit signal transmitter (5) into the desired position.
Tighten screws (3 + 4).
Replace cover plate (2) and tighten screws (1).
Screw on housing cover.
VA Master FAM540
CI/FAM540-X1