Coin Turn Functions
5a
Install escutcheon assembly.
FOR INSIDE INDICATOR TRIM, SKIP TO STEP 7.
6
For Outside Indicator Trim ONLY – Install outside
indicator trim.
A. Trim the cam spindle if necessary (cylinder and privacy
functions only).
Break the spindle at the appropriate mark according to door
thickness. (If necessary, remove clip.)
2" 1C\v"
1C\,"
B. IMPORTANT! Check indicator handing with indicator
positioned against top rim of reinforcement plate.
OUTSIDE
INDICATOR
Non-deadbolt functions*
Deadbolt functions and
L9040, L9044, L9056
* Except L9040, L9044, L9056
If necessary to change indicator handing, refer to steps on
page 8.
RH/RR
LH/LR
LH/LR
RH/RR
Cylinder Functions with Indicator
6a
Unlock the door.
6b
Install the indicator/escutcheon assembly.
Exterior
6c
Install the cylinder with cylinder spring as shown.
6d
Rotate cylinder clockwise.
L Additional outside indicator functions are shown on the
following page.
Key inserted halfway
3