Operation - Festo DMES Serie Instrucciones De Utilizacion

DMES−...
8

Operation

Warning
S Make sure that:
nobody can place his/her hand in the
path of the moveable parts (e. g. by
means of a protective screen)
there are no objects in the positioning
range.
It must not be possible to touch the DMES−...
until the mass has come to a complete
stand.
Fitting in a vertical or diagonal position
Warning
Injury to human beings / damage to property:
In the event of a spindle nut fracture (e. g. due
to wear) inside the DMES−..., the work mass
will slide down.
S Check whether additional external safety
measures against damage caused by a
spindle nut fracture are necessary (e. g.
toothed latches or moving bolts).
S If the permitted axial play is exceeded, re
place the spindle nut and, if necessary, the
spindle.
If the motor turns in the wrong direction
Please note
When the clamping element is loosened ( aA
in Fig. 1) the motor can be turned on its
longitudinal axis. The reference position will
then be lost.
S Start reference travel in accordance with
the chapter Commissioning" in order to
determine the new reference position and
adapt the target positions to the new ref
erence position.
Festo DMES−... 0602a English
Fig. 28
Fig. 29
Fig. 30
33