Micrometer Screw - Amann Girrbach Ceramill Multi-x Instrucciones De Servicio

Factor printed upon the blank form.
7.2

MICrOMeter sCrew

Loosen the upper screw of the milling guide BP with 1/2 to 3/4
of a turn.
Loosen the lower screw of the milling guide with 1/2 to 3/4 of
a turn.
CaUtIOn! Do not loosen any other screws!
Upgrade kit Multi-x
O P e r at I n g I n s t r U C t I O n s
CaUtIOn! Do not loosen any other screws, in particular not
those at the micrometer screw (see image)!!!
The value for the multiplier indicated on the blank form is adjus-
ted using the two micrometer screws BU manually or using a hex
wrench.
During adjustment of the multiplier value, do not hold or pull
the handpiece.
gB
35