Dismantling The Slicing Machine - Berkel VOLANO B3 Manual Usuario

EN
8. DISMANTLING THE
SLICING MACHINE
The machines are made up of:
- Aluminium alloy structure;
- Insertions and various in stainless steel;
- Electric parts and wires, etc.;
- Electric motor;
- Plastic materials, etc.
If disassembly and dismantling are to be
carried out by a third party, only consult firms
that are authorised in the demolition of the
above mentioned materials.
If you carry out the dismantling yourself the
materials must be separated according to type
and consult a specialised firm for their disposal.
Always abide by the regulations in force in your
country.
WARNING: In any case it is necessary
to consult the manufacturer or qualified
personnel authorised by the manufacturer
for the removal of the circular blade and
subsequent removal of the cutting wire so
that it can be disposed of safely.
DO NOT ABANDON SCRAPS WHERE
THERE IS FREE ACCESS (THERE SHOULD
BE BARRIERS AND SIGNS) BECAUSE THIS
CAN BE VERY DANGEROUS FOR PEOPLE,
SPECIALLY CHILDREN AND ANIMALS;
THE OWNER HAS SOLE RESPONSIBILITY.
18