Using The Basic Features Of The All-In-One - HP officejet 9110 Guía De Instalación Inicial

Using the basic features of the all-in-one

The following sections contain the steps for using the basic
features of the copy, scan, fax, and photo modes of the
all-in-one. For additional information about these modes,
see the onscreen user's guide on the Starter CD for your
operating system.
To copy a document or image
1 Load the original on the scanner glass or in the ADF.
2 If required, type your PIN on the keypad or keyboard.
3 Press C .
OPY
4 If the original has color and you want the copy to have
color also, press the B
LACK
setting on.
5 Press S .
TART
To fax a document
1 Load the original on the scanner glass or in the ADF.
2 If required, type your PIN on the keypad or keyboard.
3 Press F .
AX
4 Type the fax number on the keypad or keyboard.
5 To change fax options, use one of the following methods:
Press a control-panel option button (for example,
L /D ), select the value, and then press
IGHTER ARKER
(select).
Select an option from the control-panel display (for
example, Resolution), select the value, and then
press (select).
6 Press S .
TART
To save a photo from a memory card in a network
folder
1 Insert the memory card into the appropriate slot of the
all-in-one.
2 If required, type your PIN on the keypad or keyboard.
3 Press P .
HOTO
4 Press (down) to move to Save to network, and then
press (select).
5 Type the pathname for a network folder on the keyboard
or press the speed-dial button for the network folder
pathname, and then press S
user's guide for more information about methods of
specifying destinations.
6 If prompted, type your login user name, and then press
(select).
7 If prompted, type your login password, and then press
(select).
To print individual or all photos from a memory card
1 Insert the memory card into the appropriate slot on the
all-in-one.
2 If required, type your PIN on the keypad or keyboard.
3 Press P .
HOTO
4 Press (down) to move to Print photos, and then
press (select).
5 To print all photos: Press - or + to select ALL, and then
press (select).
6 To print individual photos: Press - or + to select CUSTOM,
press (select), type the numbers of the photos that
you want to print, and then press
7 Press S .
TART
/C button to turn the color
OLOR
. See the onscreen
TART
(select).
To send a scanned document or image as an e-mail
attachment
1 Load the original on the scanner glass or in the ADF.
2 If required, type your PIN on the keyboard.
3 Press E- .
MAIL
4 Type the e-mail address on the keyboard or press the
speed-dial button for the e-mail address. See the
onscreen user's guide for more information about
methods of specifying destinations.
5 To change scan options, use one of the following
methods:
Press a control-panel option button (for example,
L /D ), select the value, and then press
IGHTER ARKER
(select).
Select an option from the control-panel display (for
example, Resolution), select the value, and then
press (select).
6 Press S .
TART
To send a scanned document or image to a network
folder
1 Load the original on the scanner glass or in the ADF.
2 Press S .
CAN
3 Type the pathname for a network folder on the keyboard
or press the speed-dial button for the network folder
pathname, and then press S
user's guide for more information about methods of
specifying destinations.
4 If prompted, type your login user name, and then press
(select).
5 If prompted, type your login password, and then press
(select).
Changing the administrator PIN
A temporary administrator PIN has been set to 1234 for the
HP Officejet 9100 series all-in-one. Use the following steps
to change this PIN.
1 On the control panel, press M
2 Press (down) to move to ADMIN, and then
press (select).
3 Press (down) to move the Set admin PIN, and then
press (select).
4 Type the current PIN (the temporary PIN is 1234), and
then press (select).
5 Type a new 4-digit number, and then press
6 Type the new number again, and then press
Using the keyboard to type accented
characters
Depending on your keyboard, you can type accented
characters with a one-, two-, or three-keystroke sequence.
The following methods are most common:
Press the button combination to make the accent, and
then press the letter that you want to have the accent.
Some keyboards also have the accented characters
available by pressing the F
another button.
For those keyboards with the one-stroke accented
characters, press the key.
44
. See the onscreen
TART
.
ENU
(select).
(select).
button in combination with
N