Onboard Computer (O) - Jungheinrich ETR 314 Manual De Instrucciones

6.2

Onboard computer (o)

Battery discharge indicator: The charge level of the battery (11) is shown on the
display in 10% increments.
IMPORTANT Standard adjustment of the battery discharge indicator / discharge monitor is
performed on standard batteries.
If maintenance-free batteries are used, the display must be adjusted so that
the T symbol (12) appears after the percent. If this adjustment is not made,
the battery can be damaged from becoming fully discharged.
A manufacturer's service technician needs to make any required adjustments
to the instrument.
When a battery is discharged to the permissible discharge level, the battery symbol
is displayed empty.
Battery discharge monitor: The lift function is turned off if the remaining capacity is
below range. A corresponding message appears on the display.
The lift function is not enabled again until the charge level of the connected battery
reaches a minimum of 70%.
Remaining operating time display: The remaining operating time indicator for the
battery is an option that can be enabled via a parameter in service mode.
The remaining operating time is displayed until the remaining capacity is reached.
The remaining operating time for the battery can be displayed instead of the percent
(11) under the battery symbol (format R 00:00).
F 8
11 12
0009 h 08:45
13
1 2 3
ABC DEF
4 5 6
GHI JKL MNO
7 8 9
PQRS TUV WXYZ
CE OK
0