Operator Display (T) - Jungheinrich ETR 314 Manual De Instrucciones

1.2

Operator display (t)

The operator display is the user interface for the vehicle. It is the display and control
unit for the operator and the service technician.
The operator display and the vehicle are operated using the four short-stroke keys
(55, 56, 57, 58). The 9 illuminated symbols (36 -44, 59, 60) on the LED have three
states: on, flashing, or off.
All displays are shown in plain text or as a symbol. The meaning of each symbol is
discussed in the next section.
The high-contrast display provides information on the travel direction, the chosen
steering angle, the battery charge level and other selected vehicle parameters.
Setting the time:
– Press shift key (56) for 3 seconds.
The display (48) above the battery indicates the current time. It toggles between the
time and the remaining operating time.
– Press shift key for 8 seconds until the "Set time" menu displays.
– Set the hour using the "Up" (58) and "Down" keys.
– Confirm with the shift key.
– Set the minutes using the "Up" (58) and "Down" keys.
– Press shift or profile key (55) to return to normal operating mode.
NOTICE When setting the time, you can switch between 24-hour and 12-hour
(am / pm) display.
41
40
39
38
37
36
E 6
42 43 44 45
60 59 58
46 47 48 49 50
57 56
51
52
53
54
55