Festo CMXR-C1 Instrucciones Para El Usuario página 17

1 User
Intended use
The CMXR multi−axis control system is a modular control
system composed of a central control unit CMXR−C1, input/
output modules, fieldbuses and a handheld terminal.
The CMXR multi−axis control system is used for activating
kinetics from the Festo Modular System for Handling and
Assembly Technology, additional axes and peripheral
equipment. Programming is done in the language FTL
(Festo Teach Language).
Commissioning and parameterisation use:
The FCT software package and the CMXR−C1 plugin via
the Ethernet interface
With the handheld terminal CDSA−D1−VX
Note
This brief overview is part of the documentation
package. It is for initial information only and does
not replace the complete documentation, which is
contained as a PDF file on the CD ROM supplied.
The latest version can also be downloaded from
(www.festo.com).
S Observe the information and safety instructions in
the complete description of the multi−axis controller
unconditionally.
S Please consult your local Festo Service or write to
the following e−mail address if you have any technical
problems: service_international@festo.com
Festo GDSP−CMXR−SY−ML 0805NH English
instructionsEnglish
17