Releasing The Wheel - Snap-On ATC 970S Manual De Instrucciones

quickLOK
38 - EN
TM
2
5.5-1
3
quickLOK TM
3
5.5-2
Operations
5.5

Releasing the wheel

For the release (fi gure 5.5.1), press the release switch
(1) and extract the release system out of the rim.
The warning light indicating the lock/release status on
the panel will turn off.
Note: in case of switch malfunctioning activate
the system by pressing the key (3, Figure
5.5-2) (Quicklok version, only).
Note: "If during the release operation the button
(or switch) is kept pressed, the turntable
plate rotation does not stop with the
counter-rotation, but continues in the
same direction until the button (or switch)
is released. For safety reasons, rotation is
automatically ended by the machine after
approximately 15 seconds. You can make
another attempt after this time".