Snap-On ATC 970S Manual De Instrucciones página 5

Tires and Rims that are not the same diameter are mismatched.
NEVER attempt to mount or infl ate any tire and rim that are mismatched.
•
ALWAYS check to see that tire and rim diameters are the same.
•
A mismatched tire and rim will explode causing death or serious personal injury
Over-pressurized tires can explode causing fl ying debris.
Read and understand Operator's Manual before operating.
•
Keep bystanders away from work area.
•
ALWAYS wear Safety Goggles.
•
ALWAYS check to see that Tire and Rim diameters are the same.
•
NEVER attempt to mount or infl ate any Tire and Rim with different diameters.
•
Inspect tires, NEVER infl ate tires that are damaged, rotten or worn.
•
NEVER infl ate 'Split Rim Wheels' on this tire changer, remove them and use only an approved
•
safety infl ation cage designed for this purpose.
Lock turntable Clamp on inside of rim before attempting to infl ate tire.
•
Use approved tire bead lubricant before removing or installing tire on rim.
•
ALWAYS position the "Safety Restraint Arm" over the wheel to hold it to the turntable while infl at-
•
ing if so equipped.
If a tire explodes on this tire changer, STOP using it until the "Safety Restraint Arm" has been
•
replaced, which must be done even if no damage is seen.
NEVER place head or body over a tire during infl ation process.
•
Use short bursts of air to seat tire beads, check tire air pressure frequently.
•
NEVER exceed tire manufacturer's pressure limits.
•
NEVER attempt to bypass or alter the built in air pressure limiter. Only infl ate tire with air hose
•
supplied with tire changer. NEVER use shop infl ation hose to infl ate a tire.
Tire Changer must be anchored to concrete fl oor if equipped with a "Safety Restraint Arm"
•
Exploding Tires can cause serious injury.
ATC 970 / ATC 980 EN - 5