Storage And Recycling - Hupfer BKW1/14 L-GN Manual De Instrucciones

Section 4
Page 20
The interior and exterior of the banquet trolley should be thoroughly cleaned with a soft cloth before putting it
into operation for the first time.
Afterwards, it is necessary to check whether the appliance functions properly.
The following functions are to be checked separately:
§
In all the appliances: the functioning of the total brake.
§
In the heated appliances: the functioning of the controls and heating.
Ensure that the appliance is clean and dry before putting it into operation.
4.3

Storage and Recycling

Appliances must be kept in a dry, frost-free environment when placed in temporary storage. The banquet
trolley must be kept covered with a suitable covering material to be protected against dust ingress.
The appliance kept in the storage location must be checked for damage and corrosion every 6 months.
NOTE
Before the appliance is taken back into operation, it must be clean and dry.
If the banquet trolley is required to be recycled, all the operating and auxiliary materials must be disposed in
an environmentally compatible manner. Recyclable materials must be properly separated and disposed of in
an environmentally compatible manner in accordance with local Waste Disposal Regulations. The local
agencies responsible for disposal must be contacted regarding removal. Separate the reusable materials of
the appliance (casters and plastic parts) before disposing of or send the appliance to a recycling centre. Dis-
pose of the electronics at corresponding collection centres.
We offer our customers to dispose of their waste appliances. Please contact us or one of our distribution
partners.
Packaging and packing material can be sent to the recycling centre by indicating the waste disposal contract
number. If you do not have the valid waste disposal contract number, you can request it from
Service.
Banquet trolley heated | neutral
BKW1/14 L-GN | BKW1/20 L-GN | BKW1/36 B-GN | BKW1/14 L-GN+5PK | BKW1/28 B-GN+10PK | BKW1/23 L-GN
Condensation
Ensure that there is sufficient ventilation and no major variations in tempera-
ture in the storage location to prevent condensation from forming.
Transport, Initial Operation and Taking out of Service
Storage and Recycling
®
HUPFER -
91101983_A4