DBI SALA Sealed-Blok Serie Instrucciones Específicas página 10

A Engagement Knob Pull Ring
B Extension Pole Release Tool
C Pull to descend
D Release to stop descent
E Pull and turn counterclockwise for hands-free Descent Mode
F 270
o
G 90
o
H Insert Fork under Pull Ring and Knurled Ridge on Engagement Knob
I Fork can be inserted from 90
J Push Pole forward to descend
rsQ InspeCtIon
RSQ™ Controlled descent SRl inspection: In addition to performing the inspection procedures recommended
for all Sealed-Blok SRLs, a hand pull test should be performed on RSQ™ Controlled Descent SRLs prior to each
TM
use:
Step 1. Set knob to RSQ position.
Step 2. Grasp the cable and pull firmly to engage descent mechanism.
Step 3. Continue to smoothly pull out approximately 3 feet (1 m) of cable. Steady resistance should be felt
when pulling out cable.
Figure 9 - assisted Rescue operation
to 270
o o
10