TV Ears 2.3 Manual Del Usuario página 8

Maintenance
Replacing the foam TV Ear Tips
with the Silicone Ear Tips:
Note: Depending on usage, silicone ear tips will
become discolored and dirty with use. For
cleanliness wash the silicone ear tips with mild soap
and warm water every 30 days. We recommend
replacing silicone ear tips every 6 months or as needed.
1. If you have the foam TV Ears Tips installed on
your headset and are replacing them with the
silicone ear tips, remove the black snap tips
adapters. To remove the snap tip adapters, you
will need something with a flat edge such as a
butter knife or a spoon.
2. Place your flat object in the gap between the
snap tip adapter and the headset. Gently force
the snap tip adapter off the headset.
3. Once the foam ear tips and snap tip adapters are
removed from the headset, place each silicone
ear tip directly onto the tip of the headset where
the snap tip adapter was initially located.
Replacing the Silicone Ear Tips
with foam TV Ears Tips:
Heed all above warnings and notes about foam
TV Ears Tips and Silicone Ear Tips.
1. If you are already using silicone ear tips, remove
them prior to installing TV Ears Tips. They will
easily pull of the headset.
2. Install the snap tip adapters by gently twisting
them onto the ends of the headset.
3. Open the package of ear tips and place it on a
level surface.
4. Place the pointed end of the snap tip adapter
into the center hole of the new ear tip and push
down until you feel the new ear tip snap on the
snap tip adapter (see diagram above).
5. Gently pull the headset away from the tray.
11
Replacing the Battery:
Batteries will last up to 1-2 years depending on usage.
If you notice reduced sound and range it may be time
to replace the battery. Only use proprietary batteries
purchased from TV Ears. Be sure to purchase the same
model battery as the headset you own.
To replace the batteries, you will need:
• New faceplate with TV Ears batteries installed
(can be purchased from TV Ears representatives)
• TV Ears headset
• Small #1 Phillips head screwdriver
Replacement Instructions:
If you are uncomfortable or have trouble replacing the
battery yourself, contact your local TV Ears customer
service.
1. Turn the headset OFF.
2. Place the headset on a level surface, front side down.
3. Using the small #1 Phillips head screwdriver, remove
the two screws on the back of the headset next to
each bow arm.
4. Turn the headset over and remove the faceplate
with the TV Ears logo.
5. Place the new faceplate with batteries on the
headset and turn over.
6. Using the same screwdriver gently put the screws
in place and attach the new faceplate.
7. Place the headset on the transmitter - charging cradle
and allow your TV Ears to charge for at least 1 hour.
Note: The supplied rechargeable batteries can be
recycled. In order to protect the environment, only
dispose of exhausted rechargeable batteries at a
recycling facility. Do not dispose of batteries in trash.
Maintenance
4
4
12