Sanding; Selection Of Sanding Sheet; Choosing The Right Sanding Plate; Cleaning/Maintenance - Parkside PMS 160 A1 Traducción Del Manual De Instrucciones Original

Multilijadora
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Sanding

• Move the appliance against the work-
piece once it is switched on.
• After machining, lift the sanding disc
up before turning off the device.
• Always lead the mains cable towards
the back and away from the device.
• Clean the sanding plate before you at-
tach a sanding sheet.
• Only work with sanding sheets in per-
fect condition to achieve good sanding
results.
• Work with low and even pressure on
the hand rest (
pressure. This protects the appliance
and the sanding sheet.
• Grind rough corners and edges with
the top or side edge of the sanding
sheet. If the front tip of the triangular
sanding sheet is worn, the sanding
sheet can be removed, rotated and put
back into place.
• Do not use the same sanding sheet to
sand different materials (e.g. metal and
then wood).
• Empty the dust collection box or the
vacuum cleaner regularly in order to
ensure optimal suction.

Selection of sanding sheet

Grain size Application
P 60
for pre-sanding rough wood
P 80
surfaces
P 120
for plain sanding
P 180
for fine sanding of primed and
P 240
painted surfaces
2) and even forward
Choosing the right sanding
plate
Pre-mounted sanding plate:
• For sanding/grinding large surfaces
as well as corners, edges and outer
curves.
Sanding finger:
• For machining small slots and narrow
intermediate spaces.

Cleaning/Maintenance

Pull the mains plug before any ad-
justments, maintenance or repair.
Repair and servicing work not
described in this manual should
always be carried by our Service
Centre. Use only original parts.
The following cleaning and servicing
should be done regularly. This will ensure
a long and reliable service life.

Cleaning

Do not spray the appliance
with water and do not im-
merse it in water. Electric
shock hazard!
• Keep clean the ventilation slots, motor
housing and handles of the appliance.
Use a damp cloth or a brush.
Do not use cleaning agents or solvents.
You may otherwise irreparably dam-
age the appliance.
• Clean the sanding sheet with a vacuum
cleaner or knock it out.
GB
MT
57

Publicidad

Tabla de contenido
loading

Tabla de contenido