Description Of The Artromot®-K1 Classic; Description Of The Device Components - DJO ARTROMOT-K1 classic Instrucciones De Uso

2. Description of the ARTROMOT®-K1 classic
The motorized CPM device permits exten-
sion and flexion of the knee joint in the
range of
− 10°/0°/120°, and of the hip joint in the
range of 0°/7°/115°.
It can be used on either side and requires
no configuration change.
These are some of the outstanding
ARTROMOT®-K1 classic features:
− anatomically correct adjustment
− physiological movements
− control pendant for precise adjustment
of patient-specific therapy values
− symbols for easy operation of the con-
trol pendant
Biocompatibility
Those parts of the ARTROMOT®-K1 clas-
sic that come into contact with the patient
when the device is used as intended, are
designed to fulfill the biocompatibility
requirements of the applicable standards.
Essential Performance Features
– The programmed angles are accurately
maintained with a tolerance of +/− 2°.
– The programmed speeds are accurately
maintained with a tolerance of +/− 2%.
– The selected mode and mechanical set-
tings do not change during operation.
Frequent functions:
a) Unpacking (device and accessories)
b) Device connections (mains power con-
nection, connecting the control pendant
and the motion element)
c) Mechanical adjustments of the motion
element on the rotational axes
d) Programming the control pendant
(range of motion, speed, functions)
e) Storage
2.1 Description of the device
components
Note: Please fold out page III !
1. Thigh support assembly
2. Clamping lever to adjust the height
of the thigh support assembly
3. Thigh length scale (femur length scale)
4. Thigh length fixation screws
(femur length)
5. Knee hinge
6. Calf support assembly
7. Clamping levers to adjust the height
of the calf support assembly
8. Calf length fixation screws
(tibia length)
9. Calf length scale (tibia length scale)
10. Strap to secure the foot to the
footplate
11. Footplate
12. Footplate angle fixation screw, also
allows swiveling the footplate
13. Clamping lever to adjust footplate
rotation and level and to remove
the footplate
14. Connection for control pendant
15. Connection for power cord
16. Fuse cap
17. Power switch (ON/OFF)
18. Rating plate
19. Control pendant
20. Compartment for storage of control
pendant
21. Potential equalization terminal
Applies only to ARTROMOT®-K1 devices
1
with serial numbers > 35,000
26
1