ROBBE HeliCommand 3A Manual De Instrucciones página 22

40-41
Specifi cation
Operating voltage: 4,8 ... 6 Volt (4 ... 5 NC)
Current drain: 55mA (bei 5V)
Dimensions: 55 x 35 x 22,5 mm
Weight incl. cables: 33g
Temperature range: -5° ... +50°C,
in ‚OFF' mode: -10° ... + 50° C
Helicopter mixer: H1/ H2/ H3 / H3 (140°) / H4 / H4 (+45°)
RC module suitable for use with:
Robbe-Futaba PPM / PCM 1024 / PCM G3 modulation
Graupner/JR PPM 8, PPM 12, SPCM modulation
MPX PPM8, PPM 12 with UNI modulation
And other transmitters with standard 1.5 ms neutral position.
Set contents
• HeliCommand main unit
• RC module (with cable distributor)
• Mounting bracket
• Self-adhesive double-sided foam tape, 2 sets, 2 strips each
• Cable tie
• Instructions
40
42-43
Notes:
______________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
42
Accessories
• PC adaptor with software CD No. 84942000
• Spare RC module (for use in additional models):
(for HeliCommand with 4-pin socket) No. 8494-4000
(for HeliCommand with 3-pin socket) No. 8494-3000
incl. Mounting bracket, hook-and-loop tape and o-rings to change
HeliCommand main unit
Version update: robbe Service Centres
(see robbe catalogue)
Service
robbe – Service
Metzloser Strasse 36
36355 GREBENHAIN
Tel.: 0049-6644-87-777
Fax: 0049-6644-7412
Imprint
robbe Modellsport GmbH & Co. KG
Postfach 1108
D-36352 Grebenhain
Internet: www.robbe.com
E-Mail: offi ce@robbe.com
Tel.: 0049 (0) 6644 / 870
Fax: 0049 (0) 6644 / 7412
Notes:
______________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
41
43