Pneumatic Actuators - Td_Sa_1042 / Actuadores Neumáticos - Td_Sa_1042 - Carel ultimateSAM Manual Del Usuario

8.20 Pneumatic actuators - TD_SA_1042 / Actuadores neumáticos - TD_SA_1042
•
Air connection: 1/8" NPT fi tting for 1/4in OD plastic tubing
•
Operating temperature: -4°C to 149°C (25°F to 300°F)
•
Nominal stroke 20 mm (3/4-inch)
•
Modulating pressure: 0.7-1.03 bar (10-15 psig)
•
Maximum diaphragm pressure 2.41 bar (35 psi)
•
The actuator can be installed in any position between vertical (Best) and horizontal.
•
Minimum service space recommended: 150mm (6in) sides, and 300mm (12in) above.
•
Mounting location: NEMA 1 (Interior only)
•
Weight: 4kg (8.7lbs)
•
Information above was used from Siemens Document Number 155-161P25.
222 mm
[8.75 in]
[14.13 in]
Fig. 8.r
33
ESPECIFICACIONES / SPECIFICATIONS
359 mm
"Ultimate SAM" +0300013EE - rel. 1.0 - 28.10.2010