MWM 10 Serie Manual De Mantenimiento página 84

Apostila de Treinamento
Apostila de Entrenamiento
Training Book
DRAIN FUEL FILTER
CHECK LUBRICANT OIL LEVEL
CHECK COOLING LIQUID LEVEL
CHECK ENGINE LEAKS
CHECK CONNECTIONS
CHANGE LUBRICANT OIL
CHANGE LUBRICANT OIL FILTER
CHANGE FUEL FILTERS
CHANGE AIR FILTER
ADJUST VALVE CLEARANCE
CHECK DAMPER CONDICTIONS
TEST AND CLEAN NOZZLES
CHANGE BELT
CHANGE COOLING SYSTEM LIQUID
TEST INJECTION PUMP
DRAIN AND CLEAN FUEL TANK
Remark.: 1) This table is just for guidance. The original vehicle maintenance table prevails over this one.
2) For heavy-duty and off-road operations use, half of the periods shown in this table.
3) If the engine has to stay inactive for a long period, it is necessary to perform an idle speed test
biweekly, until to reach the operation temperature.
4) Independent of the indicated intervals between engine oil changes, it must be changed, at the
maximum, at each 6 months.
82
10 SERIES ENGINE - VEHICULAR APPLICATIONS
MAINTENANCE PLAN
SÉRIE 10
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
9.610.0.006.8160