Mahlkonig E80 SUPREME Instrucciones De Uso página 70

ESPRESSO GRINDER
Fault Cause
The grinder • The start but-
does not
grind con-
nuously or
the grinding
process stops
intermi ently.
The grinder's • The spout is
dispensing
accuracy is
decreasing.
• The grinder
• The fl apper is
• The fl apper is
The bean • There are
hopper
cannot be
a ached.
The grinder • The fi x burr
lid cannot be
a ached.
• The adjust-
70
Remedy
 Contact your service partner
ton is faulty.
 Remove the spout or clean the spout
clogged.
Too much
ground coff ee
has been de-
posited in solid
form inside
the grinder.
 Contact your service partner
spout is dam-
aged.
 Clean the fl apper (see "Cleaning the
dirty.
 Change the fl apper (see "Changing the
faulty.
 Remove the beans from the bean hop-
beans in the
bean hopper
intake.
 Align the fi x burr fl ange correctly (see
fl ange is not
installed cor-
rectly.
 Align the adjustment ring correctly (see
ment ring is
not installed
correctly.
(see the sec on "Maintenance and
service").
from the outside with a brush with the
grinder switched off .
Release the lock on the grind adjust-
ment and set the grinding degree to
"10".
Start the grinding process.
The grinder clears itself.
Then set the grind adjustment to the
se ng required during opera on.
(see the sec on "Maintenance and
service").
fl apper").
fl apper").
per intake.
"Cleaning the burrs").
"Zeroing in the grinding degree").