Changing The Fl Apper - Mahlkonig E80 SUPREME Instrucciones De Uso

The marking on the intermediate plate (41, 42) and the deepest groove
of the marking on the adjustment ring (37, 38) must lie levelly on top
of one another (see Fig. M and N). Push the adjustment ring lock back-
wards so that the adjustment ring snaps into the intermediate plate.
9. Place the grinder lid onto the grinder; proceed as described in chapter
"Cleaning the grinding mechanism manually" steps 11–12.
Changing the fl apper
Change the fl apper if it becomes porous, deformed or very dirty.
1. Remove the grinder lid (25), proceed as described in chapter "Cleaning
the grinding mechanism manually" steps 1–4.
2. Remove the fl apper (33) from the recess in the grinder and insert the
new fl apper.
3. Place the grinder lid onto the grinder; proceed as described in chapter
"Cleaning the grinding mechanism manually" steps 11–12.
E80 SUPREME | EN
67