Sol Welding QUAD Serie Manual De Instrucciones página 56

Instruction Manual
6.
COMMANDS DESCRIPTION
Fig. 2
24A
24
23A
23
22
21
20
GB
10
QUAD 275 AC/DC / COOLER UNIT 08
11
11A
12
13
14
15
16
17
18
19
19A
POS. 11 = HF ON / OFF switch
POS. 11A = (Optional) Programs protection key (See Page 21)
POS. 12 = Gas input for TIG/TIG COLD WIRE applications
3 pins socket for the flowmeter connection from the Cooler
POS. 13 =
Unit
POS. 14 = 3 pins plug with jumper
Connect to the socket (13) if the cooler unit is not used.
POS. 15 = 7 pins socket for COLD WIRE FEEDER
POS. 16 = 14 pins socket for MIG/MAG wire feeder connection
POS. 17 = 7 pins socket for wire feeder serial connection
(to be used only for wire feeder type PLUS 90)
POS. 18 = Power output for MIG/MAG wire feeder
POS. 19 = Quick release connectors for inlet (blue) and outlet (red)
For MIG/MAG applications
POS. 19A = By-Pass Tube with fast plugs
Connect to the fittings (19) if not used
POS. 20 = 3 pins cable for the flowmeter connection
To be connected to socket (13)
POS. 21 = 4 pins cable for Cooler Unit feeding
Connect opening the door (24) (See Page 6)
POS. 22 = Tightening clamp for the power supply cable fixing (21) of
the Cooler Unit
POS. 23 = Tightening clamp for the power supply cable fixing
POS. 23A = Power supply cable (See Page 5)
POS. 24 = Door for the turning on of the power supply cables terminal
POS. 24A = Screws for door fixing (24)
QUAD AC/DC SERIES