Wire Feeder Quad Cw 02 - Sol Welding QUAD Serie Manual De Instrucciones

Instruction Manual
6.
COMMANDS DESCRIPTION
58
Fig. 4
57
56
64
63
62
GB
12

WIRE FEEDER QUAD CW 02

Pos. 51 =
51
Pos. 52 =
Pos. 53 =
52
Pos. 54 =
53
Pos. 55 =
Pos. 56 =
54
Pos. 57 =
Pos. 58 =
55
Pos. 59 =
59 Pos. 60 =
Pos. 61 =
Pos. 62 =
Pos. 63 =
Pos. 64 =
60
(*) It's possible to increase or reduce the wire speed of ± 25 % from
61
the set speed of the synergy of the program
QUAD AC/DC SERIES
(Cold Wire Feeder)
Inch wire push-button
Regulation Knob for a limited range of the cold
wire speed (*)
Quick release connection for the output of the cold wire
Cold wire liner beak support
Ceramic nozzle
Pressure clips for securing the cold wire liner to
the TIG torch
External cold wire liner sleeve
Switch for forwarding or rewinding the wire on the spool
Wire spool support
Auxiliary cable to the generator
Wire guiding fitting
Upper rolls for the feeding of the wire
Upper rolls support levers
Securing and pressure knob in order to give the correct
pressure to the wire
.