Selection Of The Work Mode - Sol Welding QUAD Serie Manual De Instrucciones

Instruction Manual
This welding Machine, has been developed with an advanced
interface and regulation system. This system, trough an inte-
ractive interface, allows the user to approach the kind of wel-
ding procedure he prefers:

- Selection of the WORK MODE.

- Selection of the WORK CYCLE and STICK MODE.
- Selection of the CURRENT or THICKNESS of the BASE
MATERIAL
- Modification of the BASE PARAMETERS
10.3 SELECTION OF THE WORK MODE
M a t . : A L ( A C )
Tu n g s t . : 1 , 6
W i r e : 1 , 0
A U TO S D T N o J o b
M a t . : A L ( A C )
Tu n g s t . : 1 , 6
W i r e : 1 , 0
A U TO S D T N o J o b
GB
22
1. Press push-buttons (49)
in order to select the desired
line on the display (43) to
scroll data on that line, turn
the knob (41). Led (48) is
ON.
2. On the "MAT" line, select
the material that will be used
(if the material you are
looking for is not available in
the menu, then select one
that is similar to it).
3. On the "TUNGST" line,
select the diameter of the
TIG tungsten that will be
used.
M a t . : A L ( A C )
Tu n g s t . : 1 , 6
W i r e : 1 , 0
A U TO S D T N o J o b
M a t . : A L ( A C )
Tu n g s t . : 1 , 6
W i r e : 1 , 0
A U TO S D T N o J o b
AUTO STD:
AUTO PULSE:
AUTO MIX (only in AC mode): Welding with Synergy and Mixed
MAN STD:
MAN PULSE:
MAN MIX (only in AC mode):
In AUTO mode, the only regulation that the operator has to make
is the setting of the WELDING CURRENT (or THIKNESS of the
base material to be welded).
All the other regulations will automatically being adapt form the
software of the machine, to an optimal value for that welding cur-
rent.
All regulations are anyway, if needed, available for the user so to
be modified for particular welding conditions.
QUAD AC/DC SERIES
4. On the "WIRE" line, select
the size of the wire that will
be used (useful only when
the COLD WIRE FEEDER is
used).
5. On the last line select the
"WORK MODE" that will be
used between the following:
Standard Program with Synergy.
Pulse Program with Synergy.
Arc (AC-DC).
Free digital regulation welding.
Free digital regulation welding
with Pulsed Arc.
Free digital regulation welding
with Mixed Arc (AC-DC).