Taurus V302T Manual De Instrucciones página 25

A(mm)
760mm
Installing the foam gasket
Before inserting the hob into the opening in the kitchen worktop, the supplied foam gasket (in a plastic
bag) must be attached to the lower side of the ceramic glass.
Do not install the hob without the foam gasket!
The gasket should be attached to the hob in the following method:
▪ Remove the protective film from the gasket.
▪ Then attach the gasket to the lower side of the glass, next to the edge.
▪ The gasket must be attached along the entire length of the glass edge and should not overlap at the
corners.
▪ When installing the gasket, make sure that the glass does not come into contact with any sharp
objects.
B(mm) C(mm)
50mm minimal 20mm minimal
D E
Air intake Air exit 5mm