Taurus V302T Manual De Instrucciones página 35

Notes:
1. After connect to electricity, when power on, the buzzer of hob beeps once, all indicators light up for
1 second then go out.
2. When the hob in Standby mode, if there is no practice within 1 minute, the electric hob will auto turn
off, with buzzer beeps once.
3. To turn on hob, press the ON/OFF control button and hold on for about 3 seconds; To turn it off, just
need to press ON/OFF button again.
4. The power level can be adjusted from 0 to 9, default setting is level 5.
5. The heat setting indicator of the selected zone flashing when adjusting. After adjusting, the number
flashing for 5 seconds then stop flashing, then the setting is be confirmed.
To turn off hob
1. You can turn the cooking zone off by adjust heat setting to
level 0, which indicator shows "- ".
2. You can also turn the whole hob off by touching the
ON/OFF control button.
Note: If there is power cut off during cooking, all setting will be cancelled.
Note: The cooling fan of induction hob will remain on for about 1 minute after the hob be turned off.
Using Large Heating Area-Ceramic Hob
Some of ceramic hob models might have one or several extended cooking zones (Oval/Dual/Triple
zone), these extended zones can provide larger cooking area and additional heat to fit for different
size of cooking pan.
To use Extended zone when hob is working, follows below:
1. Select and active the cooking zone which you would like to
use extended zones, for those cooking zone with this feature.
1) For V603S:
Touch the heating zone selection control button to select and
active it for adjustment.
2. The central zone will be switched on, when first adjust of heat
level for extended cooking zone.
3. When the heating zone be selected and active (power level
indicator flashing), touch extended zone control button
to active extended heating element to get a large heating area.
Notes:
1. By continuous touch the control button, the extended zones
work at below consequence:
-Triple zone: "Central-Dual-Triple-Central-Dual-Triple-Central zone..."
2. When Triple Zone active, the LED indicator of it
will show power setting and " " alternately.