- This is normal. The hob is with Residual Heat Warning safety features. It will remain on until the
surface is cool enough for touch.
4. After turn off, the fan of induction hob remains working for a while:
-This is normal, this is to help appliances completely cool down.
5. Some pans make crackling or clicking noises during use of induction hob:
-This is normal, it's the sound of induction coils during working, and for different construction of your
cookware, the clicking might be slightly different.
6. The glass is being scratched:
-Check whether you use unsuitable cookware, like rough-edged cookware.
-Check whether unsuitable, abrasive scourer or cleaning products being used.
Failure Inspection for induction hob
If an abnormality comes up, the induction hob will enter the protective state automatically and display
corresponding protective codes:
Problem
E1/E2
E3
E5
For all other error codes, switch off and call your service provider.
Possible causes
Abnormal supply voltage
High temperature of the pan sensor
High temperature of the IGBT
temperature sensor
What to do
Please check whether power
supply is normal, Power on after the
power supply is normal.
Check whether no liquid in pan, fill with
liquid then restart.
Please restart after the
induction hob cools down.