Taurus V302T Manual De Instrucciones página 38

Using the Timer as a Minute Minder
If you have not selected any cooking zones
1.Touch the timer control button
indicator flashing.
2. Then adjust Minute Minder setting follows below:
1) Touch control models: V302T, I302T
• Set heat setting by touching the
• If press and hold either of the two buttons, the value
will adjust down or up rapidly in circle.
Note: When the timer indicator flashing, touch timer control
button another time, can quick confirm the timer setting.
2) Slider Touch control models: V603S, V604S, I603S:
• Touch the timer control button
single digit in timer indicator flashing, then adjust single
digit of minute minder setting by sliding the slider control.
• Press the timer control button again, the number of tens
digit in timer indicator flashing, then adjust tens digit of
minute minder setting by sliding the slider control.
Note: By continuous touch the timer control button, the
slider works at below consequence: "Single Digit-Tens Digit
-Confirm Setting-Single Digit-..."
3. When the minute minder is set, it will begin to count down
immediately, the display will show the remaining time.
4. Buzzer will beep for 30 seconds and timer indicator shows
"- - "when the setting time finished. Any efficient touching of
control buttons during it, would end up the buzzer beeps.
Setting the timer to turn cooking zone off
1. Touch the heating zone selection control button
the cooking zone you wish to set timer for.
2. Touch the timer control button
indicator flashing.
3. Then adjust Timer setting
1) Touch control models: V302T, I302T
• Set heat setting by touching the
• If press and hold either of the two buttons, the
value will adjust down or up rapidly in circle.
Note: When the timer indicator flashing, touch timer control
button another time, can quick confirm the timer setting.
, the number in timer
or button.
once, the number of
to select
, the number in timer
or button.