Taurus V302T Manual De Instrucciones página 26

Before locating the fixing brackets
The unit should be placed on a stable, smooth surface (use the packaging). Do not apply force onto
the controls protruding from the hob.
Easy Fit kits
There is one easy fit kits package for each hob, include fixing clips and screws (for V302T, V603S,
V604S total 2pcs clip and 2pcs screw, for I302T, I603S total 4pcs clip and 4pcs screw). Find the easy
fit kit package first.
Fix clips to hob: Insert the fixing clips into fixing holes reserved on 2 sides of housing, fix clip to
housing with screw, then insert hob into cabinet/work surface.
Fix hob to cabinet: Insert the hob into the cabinet/work surface as below diagrams, the mounted clips
on the sides can secure your hob sturdily.
Connecting the hob to the mains power supply
The power supply should be connected in compliance with the relevant standard, or a single-pole
circuit breaker. The appliance has a large power rating and must be connected to electricity by a
Qualified Electrician.
Notes:
1. If the cable is damaged or needs replacing, this should be done by an after-sales technician using
the proper tools, so as to avoid any accidents.
2. If the appliance is being connected directly to the mains supply, an omni polar circuit breaker must
be installed with a minimum gap of 3mm between the contacts.
3. The installer must ensure that the correct electrical connection has been made and that it complies
with safety regulations.
4. The cable must not be bent or compressed.
5. The cable must be checked regularly and only replaced by qualified technician.
Cautions
1. The hob must be installed by qualified personnel or technicians. Please never conduct the
operation by yourself.