Stihl FS 94 R Manual De Instrucciones página 25

Check direction of rotation of cutting
attachment
1
The cutting edges of the grass cutting
blade (1) may point in either direction –
this cutting attachment must be turned
over regularly to reduce one-sided wear.
Cutting edges of grass cutting blade (2)
must point clockwise.
WARNING
Direction of rotation is indicated by an
arrow on the inside of the deflector.
FS 94 R
2
Place the cutting attachment (4) on
N
the thrust plate (5).
WARNING
Collar (see arrow) must engage the
cutting attachment's mounting hole.
Securing the cutting attachment
Fit the thrust washer (6) – convex
N
side must face up.
Fit the rider plate (7).
N
Block the shaft (8).
N
Screw the mounting nut (9) on to the
N
shaft counterclockwise and tighten
it down firmly.
WARNING
If the mounting nut has become too
loose, fit a new one.
NOTICE
Remove the tool used to block the shaft.
Removing the Metal Cutting Attachment
9
7
Wear protective gloves to reduce the
risk of direct contact with the sharp
6
cutting edges.
4
8
N
5
N
N
WARNING
Block the shaft.
Unscrew the mounting nut
clockwise.
Remove cutting attachment and its
mounting hardware from the
gearbox – but do not remove the
thrust plate (5).
English
23