Aventics AES Serie Descripción De Sistema página 99

AVENTICS | Bus Coupler AES/Valve Driver AV, EtherNet/IP | R412018139–BAL–001–AF
In most cases, the IP address and subnet mask are not reassigned each time via the DHCP server,
but permanently stored in the bus coupler. Once the DHCP server has assigned the desired address
to the bus coupler, you must deactivate the bus coupler DHCP service for this to take effect.
Deactivate the DHCP service by clicking the "Disable BOOTP/DHCP" button.
Reboot the system.
The device will automatically start with the IP address that it had when the DHCP service was
deactivated. In this example: 192.168.1.100.
99
Presettings on the Bus Coupler