List Of Parts - Sundstrom SR 200 Airline Instrucciones De Uso

5. List of parts

The item numbers below refer to Fig. 1 at the end of these
instructions.
Item Part
1. Visor, polycarbonate
Visor, laminated glass
2. Upper frame half
3. Head harness, fabric
Head harness, rubber
4. Set of membranes
a) Exhalation, two
b) Valve covers, two
c) Inhalation, three
d) Dowels, two
5. Pre-filter holder
6. Filter adapter SR 280-3
7. Seal
8. Test adapter SR 370
9. Carrier strap
10. Belt
11. SR 350 Control valve assembly
12. Sealing cover
13. Breathing hose assembly
14. Sealing plug
Flow meter. Fig. 2
Facepiece without control valve
SR 341 Spectacle frame. Fig. 22
SR 84 Welding cassette. Fig. 23
SR 336 Steel net disc
SR 344 Storage box
SR 5226 Cleaning tissue. Box of 50
Peel-offs SR 343, for plastic visor
Peel-offs SR 353, for glass visor
Air supply hose. See section 3
SR 99 Compressed air filter. Fig. 24
SR 99H Air heater. Fig. 25
All manuals and user guides at all-guides.com
6 Approvals
EC/EN
• SR 200 Airline with compressed air line hose 358 or 359 is
• SR 200 Airline with spiral coil hose 360 is approved to
Ordering No.
R01-1201 • The plastic visor has been tested against EN 166:1995, class B.
T01-1203
R01-1202 The EC type approval certificate has been issued by
R01-1203 Notified Body No. 0194.
T01-1215 For address, see back-cover.
R01-1204
- Australian Standardsmark
- The SR 200 Airline is tested according to AS/NZS1716:2012.
- The Standardsmark is issued under licence by SAI Global
-
Certification Services Pty Limited Lic No.766 (ACN 108 716 669)
R01-0605 ("SAI Global").
H09-0212
R01-1205
T01-1206
R01-1206
R03-1510
R03-1001
R03-1406
R03-1003
R03-1005
R03-0346
R03-1006
T01-1201
T01-1212
T01-2001
T01-1214
H09-0401
T01-1204
T01-1205
H03-2612
H03-2712
approved to EN 14594:2005, 4B.
EN 14594:2005, 4A.
27