Nogueira FTN-1000 Super G2 Manual De Instrucciones página 145

After coupling, make sure there is sufficient
clearance between the tractor rear tire and
the machine, as shown in the picture besides.
Using the tractor stabilizers, center the
machine with the tractor and adjust the lateral
clearance. If you have any doubt, consult your
tractor manual.
The stabilizing chain (R) - supplied with the
machine, has the function of stabilizing
the machine during transportation and
harvesting, relieving the load that is placed
on the hydraulic lifter from the tractor.
Secure one of the stabilizing chain edges
(R) to the coupling hole at the third point
(P) and the other edge to the right coupling
point from the machine (S), according to the
picture beside.
Before checking the stabilizer chain straching,
make sure to keep a safe distance from the
machine when you lower it.
NOTE!
The use of the stabilizing chain (R) is
optional.
When setting the height in which the
machine will work, make sure that
the chain is completely stretched,
satisfactorily supporting a large part
of the machine weight.
CAUTION!
• Make sure that the hydraulic arms
are securely attached to the Harvester
before transporting or using it.
• Be sure to place the locking pins (E) on
the 3 coupling pins.
Failure to follow these instructions can
lead to personal injury and property
damage.
Instructions Manual
4. Preparation
GAP
P
R
S
E
35