Safety Devices On Board The Machine - Nogueira FTN-1000 Super G2 Manual De Instrucciones

2.1- Safety devices on board the machine

In the development of the design, fixed safety protections have been adopted
in hazardous areas of operation. All guards are fully shielded to prevent access
to risky points. This measure aims to guarantee protection to operators and
other people involved with the operation of this machine.
Never use the machine without the safety guards! Replace damaged safety
shields immediately.
NOTE!
In accordance with Regulatory Standard NR-12, "fixed protection" is considered
to be the element specifically used to provide safety through a physical barrier.
It must be held in its position permanently or by means of fastening elements
that only allow its removal or opening with the use of tools.
A
A - Safety protection for shaft
tips of the gearboxes:
Developed to prevent contact with
moving shaft ends.
Risk of removal of platform
fairing:
Contact with the moving shaft can
cause serious injuries such as fractures,
kinks, etc.
A
B
B - Cardan safety protections:
Designed to prevent any contact
with the cardan during operation.
R e m o v a l r i s k o f t h i s
p r o t e c t i o n : Contact with
moving cardan shafts can lead to
serious injuries such as fractures,
kinks, mutilation, etc., which could
lead to death.
Instructions Manual
2. Safety
B
19