How To Replace Sharpening Stone - Nogueira FTN-1000 Super G2 Manual De Instrucciones

6.1- How to replace sharpening stone

Replace the sharpener stone when you find
that it has lost its sharpening ability.
ATTENTION!
Turn off the tractor and remove
the ignition key before starting
the following procedure.
PROCEDURE:
Remove the bolts (A) and the sharpener
1.
cover (B);
Using an allen key, remove the 2 bolts (C);
2.
Remove the 2 bolts (D) and remove the
3.
sharpener from the machine;
Turn the rod (G) until the stone set (H)
4.
comes out of the sharpener;
Remove the 4 bolts (J) to release the
5.
stone (K);
Install a new stone (K) on the sharpener.
6.
Refit the sharpener in the machine,
7.
following the reverse order of disassembly.
Always use the original stones.
Inadequate stone can break during
sharpening and cause an accident with
personal injury and in the machine.
The use of PPE (suitable gloves and safety
glasses) is mandatory during the above
procedure.
ATTENTION!
Instructions Manual
6. Maintenance
B
A
C
D
H
J
G
K
A
J
85