1- Cardans Lubrication; 1- Drums Gearbox Lubrication - Nogueira FTN-1000 Super G2 Manual De Instrucciones

6. Maintenance

6.1.1- Cardans lubrication

Using a grease gun or a pump, grease the
8 hours 8 hours
20 hours
cardan crossheads every 8 working hours.
Lubricate the shafts every 20 hours.
Use lithium-based soaps lubrication greases,
grade NLGI-2.

6.1.1- Drums gearbox lubrication

The gears from drum gearbox are lubricated
A
with lithium soap grease, NLGI 00 (Example:
LUBRAX LITH-00).
It is recommended to remove any old grease
and add new grease according to the above
specification.
It is recommended to remove all old grease
and add new grease according to the above
specification.
Grease capacity of drum gearbox: 3 kg.
To complete the grease, you can remove the
Gearbox
breather plug (A) and lubricate through the
hole.
6.1.2- Lubrication of the platform's gears
When performing the annual machine
overhaul or if it is necessary to open the
gearbox (C) for maintenance, grease should
be replaced. Remove all old grease and add
new grease.
Use a grease based on lithium soap, NLGI
classification 2 (Example: LUBRAX LITH-2).
Grease quantity: 1.5kg.
C
Instructions Manual
94