Using Narrow And Wide Blades; How To Mount The Blades - Nogueira FTN-1000 Super G2 Manual De Instrucciones

USING NARROW AND WIDE BLADES

This is the factory default setting. Two narrow
blades and one wide blade are mounted on
each feeding drum. Your Harvester is delivered
with the blades already assembled this way.
ATTENTION!
Turn off the tractor and remove
the ignition key before starting
the following procedure.
Wearing PPE (Personal Protective
Equipment) is mandatory

HOW TO MOUNT THE BLADES:

Start the assembly by the right feeding
1.
drum.
First, mount a wide blade (can be in any
2.
position of the feeding drum).
Mount two narrow blades (figure on the
3.
side).
With your hands, turn the feeding drum
4.
until the wide blade is in the position
shown in the figure below. Keep the
feeding drums in this position.
RIGHT
Turn the feeding drums until
the wide blade is in this
LEFT
position
Instructions Manual
4. Preparation
LEFT
RIGHT
1 Wide
Blade
2 Narrow
Blades
61