Sharpening Chopping Rotor Knives; 1- Removing Cutting Gears Before Sharpening - Nogueira FTN-1000 Super G2 Manual De Instrucciones

6.1- Sharpening chopping rotor knives

The sharpener incorporated into the harvester
makes it possible to sharpen the all rotor
knives at the harvest place.
Sharp knives require less tractor power to
cutting plants, decrease fuel consumption
and guarantee the best cutting quality.
For safety reasons, before starting the
sharpening, remove the cutting gears.
With this procedure, the feeding drums
will stop working, providing greater safety
during sharpening.
ATTENTION!
Turn off the tractor and remove
the ignition key before starting
the following procedure.
6.1.1- Removing cutting gears
before sharpening:
Remove the 4 bolts (A) and the cover (B);
1.
Loosen the tensioner bolt (C);
2.
Remove the bolts (D) and (E);
3.
Remove the sprocket (F), the chain (G);
4.
Remove the sprocket (H);
5.
ATTENTION!
Instructions Manual
6. Maintenance
SHARPENER
B
A
E
C
D
F
H
G
81