Safety Pins; 1- How To Replace The Safety Pin - Nogueira FTN-1000 Super G2 Manual De Instrucciones

6. Maintenance

6.1- Safety pins

The harvester is equipped with two safety pins
located on the shafts of the cutting gears.
The function of these pins is to protect the
harvester in case of entry of any foreign body
(pieces of iron, stone, wood, etc.) or some
feeding overload during the operation.
When one of the safety pins breaks, the
platform stops working immediately.
If the safety pin is broken, replace it with
another of the same specification.
The use of improper safety pins
compromises the operation of the
safety system and may damage the
machine.
Do not replace the safety pin with
piece of iron, nail, bolt, etc. Use only
the original pins.
Eliminate the cause of pin breakage
before turning the machine on again.

6.1.1- How to replace the safety pin

ATTENTION!
Turn off the tractor and remove
the ignition key before starting
the following procedure.
Remove the 4 bolts (A) and the cover (B);
1.
Loosen the tensioner bolt (C);
2.
Remove the chain (D);
3.
Remove the bolt (G) and the sprocket-
4.
wheel (H);
Remove the bolts (J) and the cover (K);
5.
Remove the two gears (L);
6.
Remove the cutting set box (M);
7.
86
B
Instructions Manual
A
C
D
J
G
J
H
K
L
M