Nogueira FTN-1000 Super G2 Manual De Instrucciones página 143

Fix the bender (C) with the bolts (G) and
5.
nuts (H).
G = Hex Bolt M8 x 45 mm (02 pt)
H = Lock Nut M8 (02 pcs)
NOTE!
Note that the bender (C) has several
holes that allow it to be mounted
in different positions. Adjust to the
position that best fits the forage
plant. Remember that the higher the
plan, the higher the bender must be
positioned and vice versa.
G
Instructions Manual
4. Preparation
C
H
33