Nogueira FTN-1000 Super G2 Manual De Instrucciones página 197

Using the pin punch found in the
8.
machine toolbox, remove the safety pin
(P) that is broken;
NOTE: Generally, the broken pin is located in
the biggest gear's shaft.
Install a new safety pin;
9.
Using a compression punch, crimp
10.
the pins' ends so that they are tightly-
mounted;
After replacing the pin, replace all
11.
previously disassembled parts.
Be aware of the sprocket wheels
alignment. Observe the quantity and
position of the shim washers. Replace
them when mounting the sprocket
again.
Misaligned sprocket wheels damage
the chain and compromise the
machine.
P
Safety pin
Instructions Manual
6. Maintenance
87