1- Sharpening The Rotor Knives - Nogueira FTN-1000 Super G2 Manual De Instrucciones

6.1.1- Sharpening the rotor knives

Turn off the tractor and remove the key
1.
from the ignition;
Remove the bolts (E) and the cover (F);
2.
Using a 22 mm wrench (H), lock the
3.
sharpener and screw the rod (G), screwing
it in firmly;
Turn on the PTO in working speed (540
4.
rpm);
Position yourself next to the machine;
5.
Carefully turn the rod (G) to bring the
6.
stone closer to the knives (until the sparks
begin).
Using the rod (R), push the sharpener to
7.
the end of the rails. Take a quick break
and pull the sharpener back to the top
of the rails.
Repeat the back and forth movement of
8.
the sharpener, making quick pauses at
the beginning and end of the movement.
Repeat the back and forth movement 4
times;
After sharpening, turn off the tractor and
9.
remove the key from the ignition.
Move the stone away from the knives by
10.
turning the rod (G);
Remove the rod (G).
11.
E
Instructions Manual
6. Maintenance
F
E
G
H
G
83