Nogueira NEW PECUS Duo G2 Manual De Instrucciones página 229

Remove the 2 bolts (C) and the cover of
3.
the cutter set box (D);
Remove the two gears (E);
4.
Remove the cutter set box (F);
5.
Using the pin punch found in the
6.
machine toolbox, remove the safety pin
(H) that is broken;
NOTE: Generally, the broken pin is located in
the biggest gear's shaft.
Install a new safety pin;
7.
Using a compression punch, crimp
8.
the pins' ends so that they are tightly-
mounted;
Replace the gearbox (F), the gears (E), the
9.
cover (D), close the platform fairing (B)
and replace the bolt (A).
Instructions Manual
6. Maintenance
F
H
L
FUSE
H
Pin
F
G
J
M
101