Regulating The Benders (Only For 736 Mm Platform) - Nogueira NEW PECUS Duo G2 Manual De Instrucciones

4. Preparation
4.8- Regulating the benders
The benders (T) have the function of tilting
the plants, aiming to facilitate the harvesting
and provide the maximum use in the harvest.
The benders can be recessed or advanced
according to the crop's characteristics: the
taller the plants, the more advanced the tipper
must be and vice versa.
Regulation:
ATTENTION!
Turn off the tractor and remove
the ignition key before starting
the following procedure.
FORWARD / BACKWARD THE BENDER:
Loosen the bolts (L) and move the bender
forward or backward to the desired position.
Retighten the bolts (L). Repeat the procedure
on the other bender.
CAUTION!
Never adjust the bender with the machine
on. Turn off the tractor, remove the key
from the ignition and wait until the rollers
stop turning completely before starting
the procedure.
64
(only for 736 mm platform)
L
Instructions Manual
T
L
T
T