Hydraulic System - Nogueira NEW PECUS Duo G2 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

4.6- Hydraulic system

Connecting the hoses to the tractor:
Before connecting and disconnecting the
hoses, it is necessary to relieve the pressure
in the hydraulic system. To do this, turn off
the tractor and activate the levers some
times, relieving the system.
With the control levers in the neutral
position, pull the hoses quickly: the
disconnection will occur with minimum
oil loss.
Connecting the hoses to the tractor's
hydraulic system:
Make sure that the quick coupling is clean
before connecting it to the tractor valve. Dirt
might contaminate the system, prevent the
correct connection and preventing the oil
flow.
Remove the protective caps (R) from valves
1.
and hoses.
Couple the hoses onto the valves from the
2.
tractor's remote control, pushing firmly.
Disconnecting the hoses from the
tractor
With the control levers in the neutral position,
pull the hoses quickly: the disconnection will
occur with minimum oil loss.
Avoid working with different tractors on the
same machine. This practice can lead to the
mixing of different types of oil, which can
damage the tractor's hydraulic system.
ATTENTION!
Instructions Manual
4. Preparation
R
59

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido