Warranty; Accessories - Kärcher B 110 R Serie Manual De Instrucciones

Malfunction
The brushes do not rotate
The device does not brake
The waste water drain hose is
clogged
The "Dose" detergent dosing
unit does not work

Warranty

The warranty conditions issued by our rele-
vant sales company apply in all countries.
We shall remedy possible malfunctions on
A: Packaging unit, B: Quantity required by
the device
Description
Roller brush, red (medium, stand-
ard)
Roller brush, white (soft)
Roller brush, orange (high / low)
Roller brush, green (hard)
Roller brush, black (very hard)
Microfiber roller
Pad roller shaft
Roller pad, yellow (soft)
Roller pad, red (medium)
Roller pad, green (hard)
A: Packaging unit, B: Quantity required by
the device
Description
Disc brush, natural colour (soft)
Disc brush, white
Disc brush, red (medium, standard) 4.905-010.0 4.905-018.0 For cleaning lightly soiled or sensitive floors.
Disc brush, black (hard)
Fine diamond pad, green
Coarse diamond pad, white
Medium diamond pad, yellow
Pad drive board
A: Packaging unit, B: Quantity required by
the device
Description
Suction lip set, front PU (red), rear Linatex
Suction lip set, Linatex
PU suction lip set
30
Rectification
1. Reduce the contact pressure.
2. Check if the brushes are blocked by a foreign body and remove the foreign body if necessary.
3. If the motor is overloaded, let the motor cool down.
4. Set the programme switch to "OFF".
5. Wait 10 seconds.
6. Set the program switch to the desired program.
7. Check that the plug of the device is plugged into the cleaning head.
1. Undo the brake lock (see "Operation / Pushing the device").
1. Open the dosing unit cover at the drain hose.
2. Pull the suction hose off the suction bar and close it by hand.
3. Set the programme switch to "Vacuum".
The blockage is sucked out of the drain hose into the waste water tank.
1. "Dose" version only: Call Customer Service.
your appliance within the warranty period
free of cost, provided that a material or
manufacturing defect is the cause. In a war-
ranty case, please contact your dealer (with

Accessories

Cleaning head with roller brush accessories
R 65 R 75
Part no. Part no.
4.035-604.0 4.035-605.0 For maintenance cleaning of heavily soiled floors.
6.907-770.0 6.907-771.0 For polishing and maintenance cleaning of sensitive
6.907-726.0 6.907-730.0 For scrubbing structural floors (safety tiles, etc.).
6.907-727.0 6.907-731.0 For basic cleaning of heavily soiled floors and for coat-
6.907-728.0 6.907-732.0
4.114-054.0 4.114-007.0 For maintenance cleaning of smooth floors.
4.762-626.0 4.762-627.0 For holding roller pads.
6.369-454.0 6.369-454.0 For polishing floors
6.369-456.0 6.369-456.0 For cleaning lightly soiled floors.
6.369-455.0 6.369-455.0 For cleaning normal to heavily soiled floors.
Cleaning head with disc brushes accessories
D 65 D 75
Part no. Part no.
4.905-012.0 4.905-020.0 For polishing floors.
4.905-011.0 4.905-019.0 For polishing and maintenance cleaning of sensitive
4.905-013.0 4.905-021.0 For cleaning heavily soiled floors.
6.371-235.0 6.371-236.0 For refreshing lime-containing coverings and epoxy res-
6.371-250.0 6.371-252.0
6.371-251.0 6.371-253.0
4.762-446.0 4.762-447.0 For holding pads.
Suction bar accessories
Part no.
4.039-366.0 Standard
4.039-356.0 Tear-proof
4.039-357.0 Oil-proof
Description
floors.
ing removal (e.g. waxes, acrylates).
Description
floors.
in-coated floors.
Description
English
the purchase receipt) or the next author-
ised customer service site.
(See overleaf for the address)
A
Pair
Pair
Pair
A B
1 2
1 2
1 2
1 2
1 2
1 2
1 2
20 96; 106
20 96; 106
20 96; 106
A B
1 2
1 2
1 2
1 2
5 2
5 2
5 2
1 2
B
1 pair
1 pair
1 pair