Complete Installation; Hood Description - arietta DEKOR ISLAND 36 Guía De Instrucciones Para Instalación

2. Slide the upper duct covers up the frame to the ceiling and
secure to the upper horizontal support with 2 - 3.5 x 6.5 mm
screws.
A. 3.5 x 6.5 mm screws (2)
3. Place lower duct covers using one plastic bracket at each
side (4 needed).
A
Lower duct covers
4 - Duct cover plastic bracket
A
B
4. Secure the lower duct cover to the range hood canopy
using 4 - 4.2 x 8 mm screws.

Complete Installation

1. For non-vented (recirculating) installations only, install
charcoal filters over metal grease filter. See the "Range
Hood Care" section.
2. Install metal filters. See the "Range Hood Care" section.
3. Check the operation of the range hood blower and light.
See the "Range Hood Use" section.
NOTE: To get the most efficient use from your new range hood,
read the "Range Hood Use" section.

Hood Description

The range hood is designed to remove smoke, cooking vapors
and odors from the cooktop area. For best results, start the hood
before cooking and allow it to operate several minutes after the
cooking is complete to clear all smoke and odors from the kitchen.
The hood controls are located on the front side of the canopy.
C
A
A.Grease filter
B.Grease filter handle
C. Blower and light controls
D. LED lamps
10
B
D