Blackmagic Design Cintel Manual De Instalación Y Funcionamiento página 53

The Audio and KeyKode Reader's headphone jack is behind
a rubber dust cover at the bottom of the reader
Previewing Audio via HDMI and the Headphones Jack
Film soundtracks are printed several frames ahead of the images they sync to, therefore, your
Cintel scanner automatically delays the audio so it is synced to the picture via the HDMI output
and also synced in the scanned clip.
The headphones jack outputs real time, non-synced audio directly from the soundtrack.
This means that when you make tracking adjustments, you can hear the difference immediately
without a delay.
Rotating the tracking knob adjusts the position of the audio head so
you can improve the quality of the optical audio scan
When capturing optical audio, your reader will dim its LED light if the reader's film roller is not
turning. The reader conforms to the status of your scanner, so if the scanner enters sleep mode,
the reader will too.
Optional Audio and KeyKode Reader 53