Main Screen - Zemper PZD-250 Manual Del Usuario

Main screen.

When you turn on the programmer, the first screen that appears is the following:
1
2
3
4
5
6
7
8
9
10
1. Access to the "NUMERATION" menu. To program the number of a luminaire.
2.Switching-on of all the luminaires connected to the programmer.
3. Switching-off or stand-by mode of all the luminaires connected to the programmer.
4. Reset of all the luminaires connected to the programmer.
5. Monitoring test of all the luminaires connected to the programmer.
6. Recognition of all the luminaires connected to the programmer.
7. Access to the " STATUS" menu, in order to know what luminaires have been recognised and to know their status.
8. Access to the "LUMINARY" menu. In order to act on a specific luminaire, when connecting the programmer to a group of
luminaires.
9. Access to the "LANGUAGE" menu, in order to change the language of screen information.
10. Access to contact details of technical service.
11. Information about the menu you are at every moment.
12. Selection of the operation to be realised. With the scroll buttons, we can select the different options by moving the shading
up and down in the screen.
If you press OK, you execute the selected option.
13.Indicates that the menu you are in has more lines than can fit in the screen. To see the hidden lines (up or down in the
screen) you will move with the scroll buttons.
The different options will be detailed in the corresponding chapters of this manual.
MAIN MENU
NUMERATION
MAIN ON
MAIN OFF
MAIN RESET
ZONE TEST
MONITORING TEST
MAIN MENU
ZONE TEST
MONITORING TEST
STATUS
LUMINARY
LANGUAGE
About
29
11
12
13